CEMIC’s micro-cement - Cemi-base
Cemi-base is a product designed for micro-cement infrastructure. This micro-cement product brings seamless surface, cracks and cracks.
The characteristics of the cemi-base index of the base include high mechanical strength and lack of dust absorption. Cemi-base execution of the base by an experienced performer is easy and done quickly. Cemi-base Toxic is easily applicable to all flat and curved surfaces due to its unique adhesion to all surfaces, including tiles, cement and other materials.
Cemi-base is applied according to the surface in one or two layers (in special cases, the third layer can also be used). After executing the cemi-base, General Gr-dor, Grid Round or Gr-Prof in two layers, depending on the required features.
How to use:
In the first step, you have to mix the cemi-base in a ratio of 60 to 30 with water. The mixture should be homogenized for at least 2 minutes using a mixer to obtain a homogeneous mixture.
Then, depending on the type of surface, apply one or two toxic layers of base with a steel trowel. (To prepare the floor, always apply two layers of toxic base with flexible fiberglass mesh.) If necessary, the cemi-base execution of the base can be completed with the third layer using the "fresh on fresh" technique.
- Created on .
- Last updated on .