CEMIC’s micro-cement - Cemi-base

 

 

Cemi-base is a product designed for micro-cement infrastructure. This micro-cement product brings seamless surface, cracks and cracks.

The characteristics of the cemi-base index of the base include high mechanical strength and lack of dust absorption. Cemi-base execution of the base by an experienced performer is easy and done quickly. Cemi-base Toxic is easily applicable to all flat and curved surfaces due to its unique adhesion to all surfaces, including tiles, cement and other materials.

Cemi-base is applied according to the surface in one or two layers (in special cases, the third layer can also be used). After executing the cemi-base, General Gr-dor, Grid Round or Gr-Prof in two layers, depending on the required features.

 Cemic Microcement Products

 

Cemic Microcement properties

Cemic Microcement properties

 Cemic Microcement properties

 Cemic Microcement properties

 Cemic Microcement properties

 Cemic Microcement properties

 

 Cemic Microcement Products

 

How to use:

In the first step, you have to mix the cemi-base in a ratio of 60 to 30 with water. The mixture should be homogenized for at least 2 minutes using a mixer to obtain a homogeneous mixture.

Then, depending on the type of surface, apply one or two toxic layers of base with a steel trowel. (To prepare the floor, always apply two layers of toxic base with flexible fiberglass mesh.) If necessary, the cemi-base execution of the base can be completed with the third layer using the "fresh on fresh" technique.